Review BLUETTI EB3A

Review BLUETTI EB3A

Review BLUETTI EB3A – BLUETTI EB3A is a multi-device charger that comes with 2 AC outlets, a 600 watts pure sine wave inverter, 2 USB-a ports, and a 100 watts USB-c port. The EB3A can power any electronics including heavy-duty ones, and also serves as a backup power source for a variety of household appliances.

Review BLUETTI EB3A

The BLUETTI EB3A features three charging modes: silent, normal, and turbo. The AC outlets can power devices up to 600 watts, while the USB-c port can supply up to 100 watts for charging a MacBook at full speed. The USB-c port, meanwhile, has a maximum power output of 100 watts, making it the ideal charger for everyday tech. The EB3A also supports a range of high-wattage appliances such as refrigerators, televisions, and computers.

Review BLUETTI EB3A

The EB3A can be hooked up to a solar panel or a fuel-powered generator for additional power. It can also take charge from both AC and DC sources at once. It charges multiple devices at once and recharges quickly. The standard mode of charging an EB3A from an outlet takes about 1.5 hours while turbo mode takes just under a half-hour. If you use both ac and solar charging together, the EB3A can recharge multiple devices at once in about 40 minutes.

EB3A Specifications

Capacity:268.8Wh (12Ah)
Type:LiFePO4 (Lithium Iron Phosphate)
Life Cycles:2,500+ Cycles to 80% Original Capacity
Shelf-life:Recharge to 80% Every 3-6 Months
Management System:MPPT Controller, BMS, etc.
AC Outlets:2 x 120V/5A Outlets
600W In Total
Inverter Type:Pure Sine Wave
Surge Power:1,200W
Load More

The BLUETTI EB3A uses a built-in battery management system to ensure the longevity of the device batteries and protect against overload, overcurrent, and short circuits. In addition to this, The BLUETTI EB3A also uses Bluetooth and wi-fi connectivity and comes with an LCD screen that shows the remaining capacity percentage, and input/output power.

The BLUETTI EB3A is a compact power station with a 600 watts pure sine wave inverter and 288 wH LiFePo4 battery pack that supports up to 200 watts of solar input. The EB3A is the first BLUETTI product in the sub 3,000 wH range. It can recharge in just 30 minutes, using the included 600 watts charger. With this fast recharge time, it can fully recharge the battery from zero to 80 percent within just over one hour.

Conclusion Review BLUETTI EB3A

Designed to be more energy-efficient than traditional generators, BLUETTI EB3A is so light in terms of weight, doing its part to help you reduce carbon emissions to the environment. Go for an off-grid living anytime from RV camping to wilderness exploration with no fear of losing power. BLUETTI EB3A can be recharged in every way possible, either via AC, solar panels, car, generator, AC+Solar, or AC+Adapter, leaving you only peace of mind on the road.

View More Helpful Reviews

 

Other Articles Review

  1. Jackery 2000 Pro Review
  2. Delta PRO vs Bluetti EP500
  3. About Lithium-ion Batteries – Common Questions
  4. How to Set-up Solar Panel Stand
  5. Hybrid System Design And Calculation – Part 5

Related Products


One comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Media Partner


ecoflow-christmas