Lion Safari ME Solar Generator 2000 watt – Today’s, we’re going to go over how the Lion Safari ME works and all the buttons on the front of the unit, and what they do. So, this is the main power switch for the unit to do anything with your safari ME. You need to turn it on first, this will light up the screen.
Lion Safari ME Solar Generator 2000 watt
You have your battery indicator on the left that shows you the percentage, and the screen defaults to 99 hours and 59 minutes. The screen of your unit, once you turn it ON will stay on 24/7. If you want to shut off the screen. You hold the screen button for approximately 5 seconds, and that will turn it OFF.
 |  | ||
| Rated Capacity | 922 Wh | Cycle Life | 2500+ |
| Battery Output | 2000 W Cont / 4000 W Peak | Battery Chemistry | LiFePO4 |
| Open For Full Specifications | |||
Lion Safari ME Overview
You can now toggle it ON and OFF by hitting the screen button, if you want to turn the screen and leave it back on 24/7, you have to hold that same button for approximately 5 seconds, and it’ll now stay ON. You’ll be able to click the left-hand output button, and that turns ON both left-hand, left-sided ports. You’ll also see the screen light up indicating that you’ve turned on those output ports.
It’ll turn on your 12-volt cigarette lighter output, as well as the Anderson power pole output, the bottom output button will turn ON your USB-A and PD outputs. This is perfect for charging cell phones quick charging laptops tablets stuff like this. The far-right output button will turn on the AC plugs. These are like your common household plugs.
The unit has a 2000 watt inverter with a 4000 watts surge. This means that you’ll be able to power virtually any appliance in your house with no problem. Now, let’s turn around the unit. So, we can get a look at the back. This is the input port of your generator, one of my favorite things about the Safari ME is, that the AC wall charger is actually built-in.
Safari ME 2000
There’s no more losing a wall charger needing to order another one. It’s simply built-in and you can just plug it into any outlet like this, and start to charge. The input on the right is your Anderson power pole adapter. This is where you’ll connect your solar panel extension cabling to start charging with solar panels. They include extension cable like this with all of the kits Anderson power pole is great.
It’s super simple, you go red to red, and black to black, plug into the back of your generator and the other end will go into your solar panels. Now, you can start charging. The last plug here is where you connect your expansion batteries. This will increase the overall battery capacity of your entire generator system.
 |  |
This button here is a circuit breaker for the entire system, if anything trips, you can simply click this button and reset your system. The last thing to note is that the specs for the base unit are on the back of the generator.
View More Lion Safari Helpful Review
Other Articles Review
- Bluetti EP500 Review And Test
- Setup and Installation Fortress Power eFlex 5.4 Lithium Battery
- Review Jackery Explorer 2000
- Review Jackery 1500 Watt
- DIY 1000 watt Solar into Bluetti
Promo
