RIVER 600 And Extra Battery Bundle – Compact and portable, EcoFlow RIVER 600 Series is an ideal recreational power that gives you accessibility to handy wall outlets. RIVER 600 is the perfect companion for camping, Overlanding, tailgating, boating, etc.
RIVER 600 And Extra Battery Bundle
EcoFlow RIVER 600
The RIVER 600 can power up to 10 devices simultaneously. With 3 pure sine wave AC outlets, the RIVER 600 can power some devices up to 1800W with the X-Boost mode on. With a capacity of 288Wh, the RIVER 600 provides enough juice to run essential devices for hours, depending on the actual output.
- 11 Lbs lightweight and portable power station;
- Support 80% of essential devices with X-Boost mode on;
- Fast AC recharge within 1.6 hours;
- Handy Control with EcoFlow App;
- Modularized capacity to grow with your needs, from 288Wh to 576Wh with Extra Battery
With the modular design and the Extra Battery, you can easily expand the capacity of RIVER 600 from 288Wh to 576Wh. RIVER 600: Lightweight and portable, perfect for a weekend trip or tailgating events; RIVER 600 + Extra Battery: Compact and reliable for outdoor adventures or RV/van usage.
RIVER 600 Extra Battery
RIVER 600 Extra Battery is designed to integrate with RIVER 600 to increase the energy capacity of the unit. You can easily double the capacity of the RIVER 600 from 288Wh to 576Wh by attaching the RIVER 600 Extra Battery to the main model. The RIVER 600 Extra Battery CANNOT be used alone. You will need to install the module on RIVER 600 to use.
RIVER 600 + EXTRA BATTERY = RIVER 600 MAX After integrating the Extra Battery to RIVER 600, you will get the RIVER 600 Bundle which is monitored and managed as a whole by the BMS of the main model.
It provides a cost-effective solution to upgrade your RIVER 600 in terms of storage. With a capacity of 576Wh, the RIVER 600 Bundle provides enough juice to run essential devices for hours, depending on the actual output.
How to install RIVER 600 Extra Battery?
|1. Please make sure that the RIVER 600 is turned off. Take out the screwdriver from the extra battery module kit and locate the four screws on the bottom cover.|
Note: Please pay attention to prevent static electricity during the installation process.
|2. Please remove the 4 screws and the bottom cover. The extra battery module should be positioned as shown in the figure.|
3. Align the male and female battery sockets and connect them. Close the bottom cover. Take the four long screws from the kit and screw them on the screw mouth.
|4. Put the RIVER 600 upright and turn it on. The extra battery’s ambient light will turn on. If the extra battery module indicator light is shown on the RIVER 600’s display, it is activated successfully. If the ambient light or the extra battery module indicator light is not active, repeat the installation steps and then check the connection.|
There are no reviews yet.