Fortress Power Evault Installation – Fortress battery systems make the most of the industry’s most environmentally benign chemistry- Lithium Ferro Phosphate, which eliminates operating temperature constraints, toxic coolants, and the danger of thermal runaway and fireplace. The built-in sensible Battery Management System (BMS) integrates multilevel security ideas: Overcharge and Deep Discharge Protection; Voltage and Temperature Observation; Cell balancing.
Fortress Power Evault Installation
Fortress high-performance Lithium Batteries are manufactured on the highest high quality commonplace. It comes with a large power capacity and quick charging and continuous discharge power. The proprietary architecture and BMS eradicate the necessity for cooling or ventilation, which creates an efficient round-trip conversion.
The Fortress Lithium Battery is protected, straightforward to put in, consistently dependable, and extremely efficient. It supplies you the bottom lifetime energy cost
Reviews Fortress Power 18.5kWh
They have their own touchscreen show that gives you with the state of charge the battery voltage, your current flow out and in of the battery bank. Each battery has a 250 amp breaker at the top. So, from the terminals on the battery, its overcurrent safety 250 amps out to the loads. You may straight hook these up to an inverter, or you could possibly wire them to a excessive current bus, and parallel a number of batteries together to gain an appropriate capacity for your software.
This battery is nice for larger-scale off-grid applications typically, the minimal obviously goes to be 18 kilowatt-hours. But, if you want to have building blocks of 18-kilowatt-hour chunks, that’s the place this specific battery is going to be greatest suited.
Fortress eVault 18.5kWh
So, you understand usually we’ll be using these batteries for functions which might be 30 kilowatt hours or extra, due to the significant constructing blocks because of the 18 kilowatt-hour capacity of every of those individual banks.
Another cool function of this battery is, that it’s on casters. So, it weighs about 400 pounds but shifting it around to the place its closing resting place is going to be is fairly straightforward with the casters. This specific battery has knockouts on the sides. On either side, it means that you can put in like a one-inch conduit, or one-inch string reduction proper into the battery.
eVault 18.5kWh Specifications
| eVault 18.5 | |
| Total Energy (kWh) | 18.5 |
| Capacity | 360 Ah |
| Nominal Voltage | 51.2 (48) V |
| Voltage Range | 45-58.4 Ah |
| Recommended Charge Current | 100 A |
| Max. Charge Current (Continuous) | 170 A |
| Max. Discharge Current (Continuous) | 180 A |
| Max. Pulse Current (for 10 sec) | 200 A |
| Charging Temperature | 32 to 113 F |
| Discharging Temperature | 32 to 113 F |
| Recommended Storage Temperature | 50 to 95 F |
| Dimension (H xW x D, inch_ | 38.8 x 19.2 x 21.3 |
| Weight | 476 lbs |
| Enclosure Protection Rating | IP21 |
| Mounting options | Floor standing |
| Certificates | UL 1624 |
| Warranty | 5/10 Years |
| Scalability | Maximum 12 in Parallel (222 kWh) |
| Communication | CAN/RS485 |
| High Current Circuit Breaker | 250A |
| Efficiency | 98% |
Fortress Power VS Tesla Powerwall
Comparison between the Fortress power battery and the Tesla Powerwall battery. The very first thing that I’ll mention is the protection of our battery system. Fortress uses lithium iron phosphate chemistry in addition to being more safer than the Tesla Powerwall chemistry.
| Specifications | Fortress Power | Tesla Powerwall |
|---|---|---|
| Battery Chemistry | LFP | NMC |
| Safety | Yes | No |
| Usable Power | 16,5 | 13.5 kWh |
| No. of Parallel Stacking | 8 | 10 |
| Guaranteed Battery Cycles | 6.000 | 2.800 |
| LCD Display | Yes | x |
| Continuous Power | 8.2 KW | 5 KW |
| Peak Output | 12 kW | 7 KW |
This security also allows us to have more power and longer duration which means, that now we have a 40% more storage capacity and a 100%, 40 p.c extra output, meaning that you just’re in a position to power more home equipment for your longer period of time.
Fortress Power Evault Installation – Fortress offers a 10-year guarantee with around a 12 to 15-year lifespan whereas Tesla supplies round half of that maybe six to seven, eight years of lifespan. Now, you’re in all probability questioning how did you calculate this in terms of security and longevity.
Fortress Power 5.4kW
We calculate this using energy throughput. Energy throughput is the overall quantity of energy a battery might be expected to retailer and deliver over its lifetime. So, in the event you see here the afford clear evil has 88.8 make watt-hours of energy throughput.
The exams of Powerwall has only 37.8 make plenty of hours of energy throughput, most showing that our battery is not solely safer however gonna last a heck of quite a bit longer. And lastly, I’d wish to convey up the cost. So, you can see right here, the fortress power system here on the left, and the two Tesla Powerwall right here on the precise.
The installed cost of the fortress system is lower than that of the Tesla Powerwall with a larger inverter but in addition has a for much longer energy throughput of 88.8 compared to 75.6. So, you can see after we take this, and we get the cost per greenback per kilowatt-hour the fortress power system is definitely more environment friendly and better in terms of the dollars per kilowatt-hour that is being paid.
Fortress Power VS Sonnen Eco
Fortress Power VS Solar Edge
Fortress Power VS Pika Energy
Fortress Evault Installation
1. Mounting and securing the battery
The Fortress eVault 18.5 is designed to stand on the floor with 4 wheels on the bottom. If desired, the wheels can be disassembled. We recommend putting the batteries on durable racks to avoid flooding. Please refer to the Fortress Lithium Battery Data Sheet for weight and dimension.
2. Mounting the battery pack to a wall
- Fasten the screws through the mounting brackets into the holes of the battery pack on both sides.
- Secure the mounting brackets to the wall with screws. Make sure to leave a space of
at last 2.18 inches in between the battery pack and the wall. - Lock the rollers on the battery pack
3. Connecting the battery to the Charge Controller and/or Hybrid Inverter
The battery terminals are positioned under the top cover. Please use the screwdriver to take
the screws along the top cover off.
Please make sure the breaker near the terminal is in the OFF position. Please install the positive cable first and the negative cable second. Please do not cross the positive and negative terminals; also, ensure the terminals are not connected to any metal mounting, fixture, or body part. Recommended terminal torque is 7.0 – 7.7 Nm (5.1 – 5.7 ft-lb)
The Fortress Lithium Batteries are equipped with two M8 threaded terminals with a lock washer and nut. The right-hand stud resides in a red high-temperature molded insert. This connection is for the positive lead. The left-hand stud resides in a black high-temperature insert. This connection is for the negative lead. 8mm ring terminals along with proper size wiring cables are required to connect the battery to the inverter/charger. Do not reverse polarity, doing so will void the warranty. Use a voltmeter to check polarity before connecting terminals.
Download For eVault 18.5 kWh Details Installation
Download For eFlex 5.4 kWh Details Installation
Download For LFP-10 Details Installation
Download For LFP-5k-48V Details Installation
Other Articles Review
- Titan For Simple Off Grid Living
- JACKERY EXPLORER 1500 Solar Generator Review
- Bigbattery Powerblock LiFePO4 Reviews
- EcoFlow RIVER Pro Review and Testing
- Reviews Fortress Power eVault 18.5kWh Lithium Battery
