Bluetti AC200P Solar Panel Set-Up Guide | How To Setup Solar Panels For AC200P Solar Generator – Today, we’re going to go over how to wire your AC200P solar kits, whether that’s a quad or a hex solar kit. They’re wired the same, and we’re going to go over that in detail.
Bluetti AC200P Solar Panel Set-Up Guide
I’m going to link it up here but we already made, on how to connect the quad kits for the EcoFlow delta, the EB150, or the EB240. That’s linked up there, that required series and parallel for your AC. You only need a series connection which is what I’m going to show you now.
Here are, four rigid monocrystalline 100 watts 12 volts solar panels. These are very similar to the ones that we include in the quad or the hex kits. So, this is a good demonstration purpose for both the quad or the hex kit. You will be connecting your solar panels in series, I’m going to get into that.
Now, whether you go with a quad, or whether you go with a hex, it’ll depend on your needs and what you’re looking for. So, you can reach out to us or the sales team or just read online, and we’ll be able to decide what’s best for you, whatever kit you go with you will be connecting them in series, and this is how to do that.
How To Setup Solar Panels For AC200P Solar Generator
All right, so off the back of every solar panel, you’re going to have a positive and a negative lead. You’re going to have one side that clicks in, and one side that receives the other end. You can think about these as like a male and a female off the back of every solar panel.
Okay, so if I want to connect one panel to this panel in series, I will take one end here. So, this is a female end and this is going into the male end, and you’ll snap them together like this, that’s a positive and a negative connection, connected like this.
Now, these two solar panels are connected in series. Okay, so I have two 100 watts 12 volts solar panels connected in series, this raises the voltage of these two panels. If I want to put three panels in series, I can see this middle panel here, it’s already connected on one side. So, I take the other end of this middle panel, and I will plug it into the panel beside it.
The same way that I’ve done, now have three solar panels connected in series, raising the voltage of all three of these panels together. The amps stay the exact same, but the volts have been raised on all three panels. So, if I want to keep the series connection, we have these three panels in series. So, I’ll take the last one here, and plug this into the panel. This way, we now have all four solar panels connected in series.
This is impossible to screw up. This is super simple, you just snap them together like this. So, now on the first panel, we still have one leftover piece here, and on the last panel, we have one leftover piece. You can see that on the last panel. It’s the female end and on the first panel, it’s the male end here. All right, so now that we have all of our solar panels connected in series.
The next step is to connect the leftover leads. We’re gonna have one on one end, and one on the other end into the solar extension cabling. All of the kits come with solar extension cabling, and as you can see from the cabling, it comes with one male and one female lead.
Now, for example on this side, we’ve got the male leftover, and I will plug that into one end of the extension cabling. So, that is snapped together. Now, on the other end here, we’ve got the female lead coming off. So, I will plug that into the other set of extension cabling.
Bluetti AC200P Solar Panel Set-Up – Now, we have the four sets of panels, all connected in series which is essentially leading down to the extension cabling like this. What you have done now is connected all your panels in running them into two cablings. Two pieces of cable will run into your home, and into your generator.
And that’s it, so whether you have four, or whether you have six panels, you’ll leave your panels out in the backyard in the side yard wherever you get the most sun, and then you run the cabling into your house and start charging up your generator. It’s really as simple as that.
EcoFlow Base Camp Kit
Other Articles Review
- Fortress Power VS Rolls S6 GC2-HC Battery
- Car Live Jackery Explorer 1500
- EcoFlow Delta Fast Recharger
- SimpliPhi Batteries For Disaster preparation
- Battery Power Station EB150 1500Wh/1000W