AIMS Power Lithium Battery 12V 50Ah | LFP12V50A AIMS Power introduces its new battery product line of LiFePO4 batteries. The LiFePO4 batteries maintain constant output voltage, providing more efficient power. This allows the cell to deliver virtually full power until it is fully discharged without harming the battery, and it…
AIMS Power Lithium Battery 12V 50Ah | LFP12V50A
AIMS Power introduces its new battery product line of LiFePO4 batteries. The LiFePO4 batteries maintain constant output voltage, providing more efficient power. This allows the cell to deliver virtually full power until it is fully discharged without harming the battery, and it can greatly simplify or even eliminate the need for voltage regulation circuitry.
The battery has a much longer cycle life capacity and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety, and packed with power in a small and lightweight footprint. Easily uses the same space as your existing 12V battery and replaces lead-acid, AGM, or Gel battery applications in RVs, boats, commercial vehicles, off-grid backup power, and much more. Not intended to replace starting batteries.
Features:
- The extremely high number of charge/discharge cycles
- 10 years lifespan with proper maintenance
- Wide operating temperature range
- Unsurpassed high-temperature performance
- Green energy without metal contaminants
- Low maintenance
- High amp capacity
- Stable output voltage
- Little self-discharge
- BMS safety protection. Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allowing the battery to function safely
- Lightweight
- 50, 100& 200 Ah models available
- Short circuit protected
- Physical damage to the battery case will not cause a fire
- Excessive thermal exposure will not cause a fire
- Able to withstand over-charge/over-discharge without damage to the battery
- Sophisticated Battery Management System (BMS)
Specifications:
| electrical Specifications | LFP12V50A |
|---|---|
| Nominal Voltage | 12.8V |
| Nominal Capacity (at .5C, 77°F) | 50Ah |
| Minimum Capacity (at .5C, 77°F) | 47.5Ah |
| Expected Cycle Life | u0026gt4000 cycles w/1C charge and discharge rate, at 77°F, 80% DOD |
| Operating Specifications | |
| Charge Method | Smart charger, constant current, constant voltage |
| Charge Voltage Range (Max 14.6V) | 14.4 -14.6V |
| Continuous Charge Current | 160A Max |
| Charge Temperature | 32° F to 113° F |
| Continuous Discharge Current | 50A Max |
| Peak Instant Discharge Current (10 secs) | 100A |
| Over Voltage Shutdown | 15.6 +/-.2V |
| Discharge Cut-off Voltage | 8V =/- .5V |
| Discharge Temperature | -4° F to 149° F |
| Storage Temperature | -4° F to 113° F |
| Self Discharge (stored at 50% SOC) | u0026lt3%/month |
| Watt-hours | 600 watt-hours |
| Physical Specifications | |
| Battery Dimensions | 7.8″ L x 6.5″ W x 6.7″ H |
| Unit Weight | 17.75 lb |
| Shipped Weight | 19 lb |
| Group Size | 1250 |
| Battery post size | 5/16? |
| BMS Operation | |
| Over Charge Protection | |
| Overcharge detection voltage | 3.9 +/- .05V |
| Overcharge detection delay time | 0.96 1.4s |
| Overcharge release voltage | 3.80 +/-.05V |
| Maximum charge voltage | 3.65 +/-.05V |
| Over-Discharge Protection | |
| Over-discharge detection voltage | 2.0V +/- .05V |
| Over-discharge detection delay time | 115-173ms |
| Over-discharge release voltage | 2.3V +/- .10V |
| Over Current Protection | |
| Over-current detection delay time | 9 +/- 2ms |
| Overcurrent release condition | Cut load |
| Polarity Reverse Protection | Yes |
| Short Circuit Protection | Yes |
| UPC | 840271004570 |
| Warranty | 10 Yr Manufacturer Defect |
Promo
